QUANZHOU YISHENG MACHINERY CO.,LTD Automechanika
Shanghai 2019
Model: E (207)
Vehicle age: 4 years
Mileage: 20000KM
Engine model: 274920
Gearbox model: 722.995
Vehicle condition: No installation and modification
Fault phenomenonThe vehicle is difficult to start, and the engine malfunctions light Alarm, fault code: P001685-The position of the intake camshaft is not credible compared with the position of the crankshaft. A signal is higher than the allowable limit value. P001177-The position of the intake camshaft deviates from the standard value and cannot reach the specified position.
The vehicle will start after being parked for a long time, and it will make a 'click' sound when it starts, and it will disappear after a few seconds.
After a steady start, the engine runs normally.
Diagnostic processCheck the engine oil level, and the measurement result is normal.
According to the fault code guide, check the actual value status of the camshaft, and found that the actual value of the intake camshaft is 35.2 degrees, which exceeds the standard value (36.3 degrees-51.3 degrees).
Disassemble the valve cover and found that the intake camshaft timing position is offset.
Possible causeThe position of the camshaft adjusting wheel is offset.
The failure of replacing the intake camshaft adjusting wheel disappeared.
Copyright © 2020 Quanzhou yisheng machinery co.,ltd. | All Rights Reserved