Manufacturer of specialized in various engine camshafts
According to the latest news disclosed by overseas media, the new Mercedes-AMG C 63 model may abandon the original V8 engine and use a hybrid power system composed of a 2.0T four-cylinder engine and an electric motor. To be honest, this is not It is the first time that we have seen a small displacement engine on an AMG model.
After the launch of the second-generation Mercedes-Benz C-class code-named W203, AMG once launched the low-key C32 AMG model , That car is equipped with a 3.2-liter V6 supercharged engine code-named M112E32 used on the Mercedes-Benz C320. After the AMG upgrade, the maximum power reaches 345 horsepower, the maximum torque is 450N·m, and the 0-100 acceleration time is only Is 5.1 seconds.
Before the C55 AMG equipped with the V8 engine came out in 2004, Mercedes-Benz had been relying on the C32 with the V6 engine to compete with BMW’s M3 models. To contend, the BMW M3 equipped with a 4.0-liter V8 engine had a maximum power of 350 horsepower, so the market needed a faster W 203. At this time, Brabus accepted this task, and finally the C3.8S was born.
Brabus still uses the M 112E32 engine as the basis, and the engine is equipped with a longer-stroke crankshaft and new connecting rods and more Big engine pistons. Redesigned a new engine camshaft and valve, and a new stainless steel exhaust system, making the V6 exhaust sound more pleasant.
The modification effect of Brabus is not ideal. After the design modification, the performance of the V6 engine is similar to that of the C32 AMG, and there is no significant difference. improve. The maximum power of this car is 300 horsepower and the maximum torque is 400N·m. Like AMG, the transmission system still uses a five-speed automatic gearbox, and the drive is rear-wheel drive.
In order to cope with the increase in power, the engineers adjusted the suspension system and replaced larger brake discs and brakes The calipers, front/rear bumpers are also aerodynamically adjusted, and the wheels use Brabus's signature double-spoke alloy wheels.
The initial plan for this car was to produce 100 units, but in the end, about 50-60 units were produced until production stopped.
The C3.8S in the photo is No. 36. It is currently located in the United Kingdom and was imported from Japan last year. You don’t need to think that the Japanese market will definitely be right-hand drive. As far as we know, all Brabus-made cars have steering wheels on the left.
The appearance of the car in the photo looks pretty good, but there are some slight scratches on the front bumper There are some bumps underneath. The interior of the car is clean and clean. Although this is an old car nearly 20 years old in 2002, the interior is in good condition due to the low frequency of use. So far this car has driven a total of 62,851 miles.
It is said that this car has been repaired and maintained by a Mercedes-Benz authorized service provider, but the maintenance manual has been lost.
At the time of writing this article, the bid for this car was 4,700 pounds (approximately 42,000 yuan), and the auction returned There are 2 days to close. Do you like this kind of Babos?
Copyright © 2020 Quanzhou yisheng machinery co.,ltd. | All Rights Reserved
